I have a problem getting access to my PIX Version 8.0(4), so we did have an ACS for AAA authentication, but we put it down and we delete the aaa-server command from the firewall to fallback to the local authentication,
what's happen is, some one change the privilege level of the local password from15 to 0 to not use it from our partner to get to this firewall.but he forat to delete the local authorization commande.
so right now, we have a fallback to local authentication and authorization but with no privilege. and this is what i get right now :
PIX-FW-01# conf t
Fallback authorization. Username 'enable_15' not in LOCAL database
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...