I have ACS 4.1 and i've configured aaa in a Router, my problem is that I can't see the accounting in ACS for example i want to know that has done the users for example if an user type show runn, conf ter, shutdown in the interface. actually my aaa configuration is:
How i can see the accounting?? in the acs?? in acs 3.3.3 I can see the accounting, but in this version nothing.
enable secret 5 $1$051s$Few6cFXNT6T0TdAZqHkNu.
aaa authentication login default group tacacs+ local
aaa authentication enable default enable
aaa authorization config-commands
aaa authorization exec default group tacacs+ local
aaa authorization commands 1 default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 1 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
Thanks for the info. Their is a know bug for command accounting in ACS v4.1 and it is fixed in cumulative patch 5. The patch is available at cisco.com. make sure you take the backup before applying the patch. CSCsg97429 TACACS+ Command Accounting does not work in ACS 4.1(1) Build 23.
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...