Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem whit port console for ACS in switch 2950-XL!

I set a Catalyst 2950 switch to the console port authentication is THROUGH the ACS, in case of failure to use the local user base, works well.

the problem is with a 2950-XL switch, which does not support the command aaa authorization console, I can do?

the configuration is:

username admin privilege 15 password 0 123456

aaa authentication login default group tacacs+ local

aaa authentication login CONSOLE local

aaa authorization config-commands

aaa authorization exec default group tacacs+ local

aaa authorization exec CONSOLE local

aaa authorization commands 0 default group tacacs+ if-authenticated

aaa authorization commands 1 default group tacacs+ if-authenticated

aaa authorization commands 15 default group tacacs+ if-authenticated

aaa accounting exec default start-stop group tacacs+

aaa accounting commands 0 default start-stop group tacacs+

aaa accounting commands 15 default start-stop group tacacs+

aaa accounting connection default start-stop group tacacs+

aaa accounting system default start-stop group tacacs+

line con 0

authorization exec CONSOLE

login authentication CONSOLE

i try to access the switch:

Username: admin

Password: ******

SWAdmin5>en

Password:

% Access denied

SWAdmin5>

suggestions friends "

1 REPLY

Re: Problem whit port console for ACS in switch 2950-XL!

I guess you have 2900XL switch. CAT 2950 do support this command.

The problem is that the XL switches do not support this command.

Regards,

~JG

Do rate helpful posts

321
Views
0
Helpful
1
Replies
CreatePlease to create content