Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Problem with Changing PPPOE user rate-limit via CoA packet


Hi All, We use 7206VXR as a pppoe bras, due to limited bandwidth during night hours we decided to change our clients download rate during the period. So we generate per session CoA packet and get ACK from cisco, But this is not update the previous values just add new rate-limit:

IOS:

c7200p-adventerprisek9-mz.122-33.SRC1

BRAS#sh int Virtual-access 2007 rate-limit

Virtual-Access2007

  Input

    matches: all traffic

      params:  256000 bps, 48000 limit, 96000 extended limit                 <------------------ Original Values

      conformed 20056 packets, 1939505 bytes; action: transmit

      exceeded 0 packets, 0 bytes; action: drop

      last packet: 2004696ms ago, current burst: 0 bytes                         

      last cleared 03:11:01 ago, conformed 1353 bps, exceeded 0 bps

   matches: all traffic

      params:  1024000 bps, 128000 limit, 256000 extended limit             <-------------------- New Values via CoA

      conformed 0 packets, 0 bytes; action: continue

      exceeded 0 packets, 0 bytes; action: drop

      last packet: 11509504ms ago, current burst: 0 bytes

      last cleared 03:09:46 ago, conformed 0 bps, exceeded 0 bps

  Output

    matches: all traffic

      params:  256000 bps, 48000 limit, 96000 extended limit

      conformed 20172 packets, 26466289 bytes; action: transmit

      exceeded 9311 packets, 12622701 bytes; action: drop

      last packet: 160292ms ago, current burst: 0 bytes

      last cleared 03:11:01 ago, conformed 18472 bps, exceeded 8810 bps

    matches: all traffic

      params:  1024000 bps, 128000 limit, 256000 extended limit

      conformed 0 packets, 0 bytes; action: continue

      exceeded 0 packets, 0 bytes; action: drop

      last packet: 11511624ms ago, current burst: 0 bytes

      last cleared 03:09:49 ago, conformed 0 bps, exceeded 0 bps

as you can see above both policies are match all traffic and the first one is applying always, How can I replace the Original values not Adding new values?

I even can't find a way to remove the first rate-limit via CoA, If there is a way to remove first rate-limit values via LCP let me know plz

Thanks for your help

1 REPLY
New Member

Problem with Changing PPPOE user rate-limit via CoA packet

I use both

Cisco-AVPair = "lcp:interface-config......

and

Cisco-AVPair += "lcp:interface-config........

statements, No luck

135
Views
0
Helpful
1
Replies
CreatePlease to create content