I try to setup my 1720 Cisco Router to use a TACACS+ server for authentification and eventually authorisation for administration purpose. I have setup my router as it is in the attached file (my_router_configuration.txt)... For some reason, my TACACS Server look like never received authentification request.... is something is missing in the configuration on my Cisco router.
my IOS is : c1700-y-mz.120-7.T
I also try why other router with more recent IOS which is : c1700-y-mz.123-26.bin and I have the same problem with this one...
I have my loggin level to debug but nothnig is appears in the log file of the router.... same as on the TACACS server....
This attemp configuration was complete with ClearBox Server TACACS Software, but I was also try with our new ACS server last week and I have obtain same result.... (last weak I was working for a different production environnement then today.....) We will have both solution running when all will be complete.... on of those should be very less expensive then the ACS solution Server, and running on Windows server.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...