"write to 220.127.116.11 failed with errno 257((ENOTCONN))"
I have a ACS 5.0 and a router C5940 tried to authenticated it. When i put a debug tacacs the router displays "write to 18.104.22.168 failed with errno 257((ENOTCONN))" the connectivity is ok but the request doesn´t arrive to acs, the other devices work ok, with the same configuration. I need to know if there are a solution for this issue.why in the tacacs+ config alone i am facing the issue .whereas for the same device radius is working fine.
Re: "write to 22.214.171.124 failed with errno 257((ENOTCONN))"
Could you check if ACS is reachable from the router, is there any other devices between ACS and router, seems port 49 is not responding, and also check on the access policy on ACS to see the hit counts
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...