Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

RADIUS-3-NOSERVERS: No radius hosts configured or no valid server present in the server group

Hi,

I currently have an C2960 switch with IOS 15.0(2) SE4. To log on the CLI of the switch authentication against a RADIUS server takes place. Accounting is not wanted. The config of the switch is as follows:

aaa new-model

aaa group server radius RADIUSGROUP

 server xxx.xxx.xxx.1 auth-port 1812 acct-port 0

 server xxx.xxx.xxx.2 auth-port 1812 acct-port 0

 

aaa authentication login default group RADIUSGROUP local

aaa authentication dot1x default group RADIUSGROUP

aaaauthorization network default group RADIUSGROUP

 

radius server host xxx.xxx.xxx.1 auth-port 1812 acct-port 0 key 7 [encrypted password]

radius server host xxx.xxx.xxx.2 auth-port 1812 acct-port 0 key 7 [encrypted password]

 

It works fine, the authentication and the login are successful, but every login generates a message in the logging of the switch:

RADIUS-3-NOSERVERS: No radius hosts configured or no valid server present in the server group

What is going wrong???

Any help would be appreciated.

 

207
Views
0
Helpful
0
Replies
CreatePlease login to create content