Radius Accounting setup

[worldcalltel]

hi,

I'm working with AS5350 and ClearBox RADIUS server. My objective was to dump all the call details to my ClearBox. Currently, I have configured some radius parameters in CiscoAS5350.

radius-server host 192.168.111.8

auth-port 1813 acct-port 1812

radius-server key 7 12481603171B5B55

radius-server vsa send accounting

I tried to make a call in and call out, but I have not seen any packets from cisco even after I issued debug radius accounting.

Your great help or suggestion is higly appreciated.

Thanks

[Jagdeep Gambhir]

Do you have these aaa commands,

aaa accounting exec default start-top group radius

aaa accounting network default start-stop group radius

aaa accounting connection h323 start-stop group radius

Regards,

~JG

Do rate helpful posts

[worldcalltel]

Hi,

thank you for your prompt response. Now I have seen a useful information on the debug radius accounting. My question now, is from cisco perspective what information does it send by default ? because i had captured a debug information, see details below:

Jul 15 01:43:39.556: RADIUS/DECODE: parse response no app start; FAIL

.Jul 15 01:43:39.556: RADIUS/DECODE: parse response; FAIL

.Jul 15 01:43:39.640: RADIUS: No response from (192.168.111.8:1813,1812) for id 1646/164

.Jul 15 01:43:39.640: RADIUS/DECODE: parse response no app start; FAIL

.Jul 15 01:43:39.640: RADIUS/DECODE: parse response; FAIL