Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Radius and Tacacs for the same device Cisco ACS

We have just installed a load of AP's in our warehouse. We use Cisco ACS (radius) for Leap and MAC address authentication on the WLAN clients. We now want to be able to telnet to the AP's and use TACACS+ usernames and passwords to log on but as we already have the config in for radius we can not add a device with the same hostname into the ACS sever for the TACACS configuration. Any idea's?

1 REPLY
Cisco Employee

Re: Radius and Tacacs for the same device Cisco ACS

You can't add two devices into ACS with the same hostname, but you can add two devices into ACS with the same IP address. The hostname in ACS is simply a label for you to reference, it doesn't have to match the actual hostname of the device.

Just add "ap-leap" in as a Radius server, and add "ap-telnet" in as a TACACS server, both will have the same IP address.

155
Views
0
Helpful
1
Replies
CreatePlease to create content