Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Radius Attribute Issue

Hi,

I'm having some issues on implementing radius accounting. Below are my configurations

aaa group server radius ClearBox

server 192.168.111.8 auth-port 1812 acct-port 1813

accounting accept ClearBox

!

aaa accounting exec default start-stop group ClearBox

aaa accounting network default start-stop group ClearBox

aaa accounting connection h323 start-stop group ClearBox

aaa accounting resource default start-stop group ClearBox

aaa session-id common

!

gw-accounting aaa

!

radius-server attribute list ClearBox

attribute 1,4-6,25-26,28-31,40-41,44,46,49,61

!

radius-server host 192.168.111.8 auth-port 1812 acct-port 1813

radius-server key 7 12481603171B5B55

radius-server vsa send accounting

I am using ClearBox as my radius server. It seems that the ff attributes (h323-connect-time,h323-disconnect-time,h323-disconnect-cause,) was not recorded on the ClearBox. See attached file for the screenshot. May be you can help me on this issue.

1 REPLY
Bronze

Re: Radius Attribute Issue

Try to enable the following debugs:

debug isdn q931

debug ppp negotiation

debug aaa authen

debug aaa accounting

debug radius

149
Views
0
Helpful
1
Replies
CreatePlease to create content