Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

radius broke my IOS?

while configuring a 3560G for aaa\radius my router froze and had to be manually booted.

aaa settings are ok, didn't get any problems with this part

but when I started typing the radius commands... oh boy!

this is the first line: ip radius source-interface Vlan200

then this is the second command which broke it all:

radius-server host 192.168.200.x auth-port 1645 acct-port 1646 key 7 password

any idea what & why this command would break and how can I configure my radius without breaking the switch?

1 REPLY
Bronze

Re: radius broke my IOS?

This example shows how to enable AAA, use RADIUS authentication and enable device tracking:

Switch(config) configure terminal

Switch(config)# aaa new-model

Switch(config)# aaa authentication login default group radius

Switch(config)# aaa authorization auth-proxy default group radius

Switch(config)# radius-server host key key1

Switch(config)# radius-server attribute 8 include-in-access-req

Switch(config)# radius-server vsa send authentication

Switch(config)# ip device tracking

Switch(config) end

149
Views
0
Helpful
1
Replies