Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Radius server drop from config

All, I have this unusual problem with a couple of switches that perform DOT1X with a pair of v4.1 ACS servers. From time to time the switches will seem to drop the secondary ACS server from their config. This is based on the output of the "sh radius server-group all" command". Here is some sample output of the problem:

switch#sh radius server-group all

Sever group radius

Sharecount = 1 sg_unconfigured = FALSE

Type = standard Memlocks = 1

Server(xx.xx.xx.xx:1812,1813) Transactions:

Authen: Not Available Author:Not Available Acct:Not Available

Server(0.0.0.0:0,0) Transactions:

Authen: Not Available Author:Not Available Acct:Not Available

There should be a second server listed in this group but there is not. I have to go into config mode and remove the second server via the "no radius ..." command and re-add it. Anyone seen this problem and have an idea what the problem is and how to correct it?

KM

2 REPLIES
New Member

Re: Radius server drop from config

Hi

What model/IOS of switch are you running?

Craig

New Member

Re: Radius server drop from config

They are 3560 Switches running 12.2(25)SEE2-4.

360
Views
0
Helpful
2
Replies
CreatePlease login to create content