Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Radius server response

hi,

i have added a controller to the ACS as a AAA client then defined the ACS in the WLC but i cant be able to authenticate users from the ACS only the local users on the WLC how can i get over this? help please.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Radius server response

The "bad request from NAS" usually indicates incorrect shared secret settings. Please

check or re-configure the shared secret on the controller and ACS for this NAS, do not copy/paste.

4 REPLIES

Re: Radius server response

Hi,

Do you get any hits in ACS failed attempts ? Is acs for windows or acs appliance ?

Regards,

~JG

New Member

Re: Radius server response

the ACS i have is an appliance. messages on failed attempts changed from unknown NAC (though the WLC's IP was listed) to bad requests.

New Member

Re: Radius server response

the ACS i have is an appliance. messages on failed attempts changed from unknown NAC (though the WLC's IP was listed) to bad requests.

Re: Radius server response

The "bad request from NAS" usually indicates incorrect shared secret settings. Please

check or re-configure the shared secret on the controller and ACS for this NAS, do not copy/paste.

180
Views
0
Helpful
4
Replies
CreatePlease to create content