Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

radius & switch

I set a switch to use radius server. And I left a backdoor for local. The command as :

set authentication login local enable

set authentication radius enable telnet

But when the radius down, switch still show user/password.When I put username(whatever)/password(login), it failed.

Why?

2 REPLIES
Silver

Re: radius & switch

Hello,

What version of code you are running? Please make sure to run 7.5.1 or above for the local user database authentication. Here is the link that explains the details -

http://www.cisco.com/en/US/tech/tk583/tk642/technologies_tech_note09186a0080094ea4.shtml#c

In the link, it shows how to create the local user. Please make sure to do this step. Regards,

Mynul

New Member

Re: radius & switch

Yes, I have checked the article. But in the STEP B, it configure radius used local as a backdoor, which catos is from 5.1 to 7.5.1.

I just wander how it works at catos before 7.5.1

202
Views
0
Helpful
2
Replies