cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1380
Views
10
Helpful
10
Replies

RADIUS Views

kamrannaseem
Level 1
Level 1

Hi All,

Could any one please explain what RADIUS views are ?

any help will be much appriciated.

Many thanks.

Kamarn.

2 Accepted Solutions

Accepted Solutions

awwh, parser view this is also called RBAC - Role based access control.

Here are few examples you may refer while configuring it. In case you have any issues, post your queries here.

IOS: Role-based Access Control with ACS

https://supportforums.cisco.com/docs/DOC-15765

http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_role_base_cli_ps6922_TSD_Products_Configuration_Guide_Chapter.html

~BR
Jatin Katyal

**Do rate helpful posts**

~Jatin

View solution in original post

I tried to check this in the feature navigator tool but couldn't find anything related to pareser view or RBAC.

http://tools.cisco.com/ITDIT/CFN/jsp/SearchBySoftware.jsp

Command reference says that The view keyword and view-name argument were integrated into Cisco IOS Release 12.2(33)SRB.

http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_e1.html#wp1059941

Have you tried to enable the same fetaure on some other code/image?

~BR
Jatin Katyal

**Do rate helpful posts**

~Jatin

View solution in original post

10 Replies 10

Jatin Katyal
Cisco Employee
Cisco Employee

Hi kamran,

I didn't understand your last web query. Could you please elaborate your question?

~BR
Jatin Katyal

**Do rate helpful posts**

~Jatin

Hi Jatin,

I have been told to conifugre views in RADIUS. I dont know myself what it is.

Have you heard anything like that in RADIUS ?

Many thanks.

Hi Jatin,

Its called parser view.

Many thanks.

awwh, parser view this is also called RBAC - Role based access control.

Here are few examples you may refer while configuring it. In case you have any issues, post your queries here.

IOS: Role-based Access Control with ACS

https://supportforums.cisco.com/docs/DOC-15765

http://www.cisco.com/en/US/docs/ios/sec_user_services/configuration/guide/sec_role_base_cli_ps6922_TSD_Products_Configuration_Guide_Chapter.html

~BR
Jatin Katyal

**Do rate helpful posts**

~Jatin

Thank you ever so much Jatin you are the star !!!

Hi Jatin,

I was just trying to enable view but seems like command doesnt exist in the IOS. Do you know the command to enable parser view. I am using cisco 2960 switch.

any help will be much appriciated.

Many thanks.

How are you enabling view through console or telnel/ssh session?

~BR
Jatin Katyal

**Do rate helpful posts**

~Jatin

Hi Jatin,

I am enabling through cosole, and the IOS image I am using is c2960-lanbasek9-mz.122-35.SE5.bin

Do all IOS images support parser views or i need a specific image for that ?

many thanks.

I tried to check this in the feature navigator tool but couldn't find anything related to pareser view or RBAC.

http://tools.cisco.com/ITDIT/CFN/jsp/SearchBySoftware.jsp

Command reference says that The view keyword and view-name argument were integrated into Cisco IOS Release 12.2(33)SRB.

http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_e1.html#wp1059941

Have you tried to enable the same fetaure on some other code/image?

~BR
Jatin Katyal

**Do rate helpful posts**

~Jatin

Hi Jatin,

I did not try on any other relase this is the only available release I have.

Do you know where I could find which IOS image supports which feature set ?

many thanks.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: