remote control, machine, user auth and dynamic VLAN
I have ISE implemented with machine and user auth. I also use dynamic VLAN assignment(when user connect he get an IP in the default Vlan then he is authenticated and get an IP in his corespondant department). I use Microsoft System Center 2012 R2 for remote access and remote control on client PC
I use Windows 7 on client machine
Issue description: The windows remote access are possible as much as the user’s assistance does not required to switch to an other account In case a switch to admin account is done, the network connection is lost and I can no more continue unless the remote user reconnects again.
Please how can I configure ISE to permit remote acces and switch to other user session without loose conexion ?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...