Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Restricting access using ACLs

I want to restrict access to a group of IPs in my network for certain users dialing in through my NAS. I have read the http://www.cisco.com/warp/public/480/tacacs_ACL1.html and it is exactly what I want to do.

I'd like to create ACLs on the ACS Server and apply them to certain users/groups when they dial in. My problem is that in ACS 3.1 I cannot find the 'Custom Attributes' box under the PPP where I am supposed to type the ACLs to be downloaded to the router. What am I missing?

How to do this in ACS 3.1?

Thanks in advance,

Izak

1 REPLY
Cisco Employee

Re: Restricting access using ACLs

You need to configure ACS to have those attributes assigned per group/user basis config. For that here is the link which explains how to configure that

For non-IETF attributes

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs31/acsuser/i.htm#1077

For IRTF attributes

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs31/acsuser/i.htm#1031

Under interface config, you will see lists of attributes, which you can include under user and group setup. Select it where you want them to be displayed.

203
Views
0
Helpful
1
Replies
CreatePlease to create content