07-30-2006 05:57 AM - edited 03-10-2019 02:41 PM
Can i have logging limitation configured on the groups in Cisco ACS 4.0 SE
Heres what i want to achieve.
There will be two groups siteA and siteB
I also create 2 network device groups say NDG1 and NDG 2
Now the users in the SiteA should be able to access devices associcated with both NDG1 and NDG2
But users in SiteB should be able to access only devices associated with NDG2 and ny ACS should not authenticate them when they try to log on to any device associated to NDG1
With my current configuration, the user in NGD2 gets a user prompt for the NDG1 devices.
Thanks in advance
Narayan
Solved! Go to Solution.
07-31-2006 06:47 AM
Hi Narayan,
Pls take a look at the following post:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB?cmd=pass_through&location=outline@^1@.1ddb89cb/0#selected_message
Rgds,
AK
07-31-2006 06:47 AM
Hi Narayan,
Pls take a look at the following post:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB?cmd=pass_through&location=outline@^1@.1ddb89cb/0#selected_message
Rgds,
AK
08-01-2006 10:08 AM
sure Amrih,
I will check that out and let you know.
Narayan
08-02-2006 12:15 AM
Thanks Amrih,
That worked out although the properties were on the user settings than on the group settings
Narayan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide