Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Restricting Device groups access in ACS 4.0 SE

Can i have logging limitation configured on the groups in Cisco ACS 4.0 SE

Heres what i want to achieve.

There will be two groups siteA and siteB

I also create 2 network device groups say NDG1 and NDG 2

Now the users in the SiteA should be able to access devices associcated with both NDG1 and NDG2

But users in SiteB should be able to access only devices associated with NDG2 and ny ACS should not authenticate them when they try to log on to any device associated to NDG1

With my current configuration, the user in NGD2 gets a user prompt for the NDG1 devices.

Thanks in advance

Narayan

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Restricting Device groups access in ACS 4.0 SE

Hi Narayan,

Pls take a look at the following post:

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB?cmd=pass_through&location=outline@^1@.1ddb89cb/0#selected_message

Rgds,

AK

3 REPLIES

Re: Restricting Device groups access in ACS 4.0 SE

Hi Narayan,

Pls take a look at the following post:

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB?cmd=pass_through&location=outline@^1@.1ddb89cb/0#selected_message

Rgds,

AK

Re: Restricting Device groups access in ACS 4.0 SE

sure Amrih,

I will check that out and let you know.

Narayan

Re: Restricting Device groups access in ACS 4.0 SE

Thanks Amrih,

That worked out although the properties were on the user settings than on the group settings

Narayan

138
Views
0
Helpful
3
Replies