Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

send IP range

Hi...

i have Cisco 3640 Router and i am using freeRadius with MySQL to send static IP address to my customers. I dont have any problem to give static IP address to customer.

Framed-IP-Address', 'A.B.C.20

Framed-IP-Netmask', '255.255.255.0

I would like to give IP range (eg. 3 bits 6 IP address) as well to customer so the customer can use these IP addresses.

Anyone can help me

Thanks

2 REPLIES
New Member

Re: send IP range

Framed-IP-Netmask has influence only on NAS side and

it'll insert the correct route into the routing table

(see the enclosed part), but it'll have NO effect

on the client side - meaning that the end-user should

do all addressing by himself.

Routing table for PPP user with one /28 subnet:

U 192.168.1.128/28 [1/0] via 192.168.100.129

C 192.168.1.129/32 is directly connected, Virtual-Access35

/Igor

New Member

Re: send IP range

Framed-IP-Netmask has influence only on NAS side and

it'll insert the correct route into the routing table

(see the enclosed part), but it'll have NO effect

on the client side - meaning that the end-user should

do all addressing by himself.

Routing table for PPP user with one /28 subnet:

U 192.168.1.128/28 [1/0] via 192.168.1.129

C 192.168.1.129/32 is directly connected, Virtual-Access35

/Igor

117
Views
0
Helpful
2
Replies