Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

snmp trap from Cisco ISE

Does Cisco ISE have the capability to send snmp trap when its configuration is changed?

Everyone's tags (2)
5 REPLIES

snmp trap from Cisco ISE

Kashish,

I do not think this feature is available in ISE, usually the traps that are sent for cold starts and warm starts..etc. However, I can not find any documentation regarding the snmp library for ISE management.

It would be best to get confirmation from TAC.

Thanks,

Tarik Admani
*Please rate helpful posts*

Tarik Admani *Please rate helpful posts*

snmp trap from Cisco ISE

Yes, Cisco ISE 1.1.X or higher version have this functionality. For  configuration of SNMP trap in Cisco ISE environment you may follow the below  link:

http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_sw_cnfg.html#wp1059829

Community Member

snmp trap from Cisco ISE

You can do this within the ADE-OS command line of the appliances/VM.  Of course, the traps are relevant to the local device.

All of the standard SNMP commands are there.

Cisco Employee

snmp trap from Cisco ISE

ISE supports a limited number of SNMP MIBs. They are documented here.

http://www.cisco.com/en/US/docs/security/ise/1.1/cli_ref_guide/ise_cli_app_a.html#wp1173352

You can send traps and poll ISE via SNMP. ISE does offers a robust set of alarms that can be configured that should provide what you are looking for.

http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_mnt.html#wp1149284

You can configure alarms to send syslogs or email alerts but no SNMP traps. Think of ISE more like a server an less like a network switch. Most of my customers end up using alerts over SNMP.

Community Member

snmp trap from Cisco ISE

How to configure ISE to RECEIVE SNMP traps and how to see it on ISE console/GUI?

11195
Views
3
Helpful
5
Replies
CreatePlease to create content