Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

TACACS Accounting

Hi everyone,

I am trying to get my Cisco devices to log accounting information back to my TACACS server, accounting information such as IP address and commands issued.

My config is pasted below but I cannot seem to get any messages back to the server although authentication works fine.

aaa new-model

aaa authentication login default group tacacs+ local

aaa authentication enable default group tacacs+ enable

aaa accounting send stop-record authentication failure

aaa accounting delay-start

aaa accounting exec default start-stop group tacacs+

aaa accounting commands 0 default start-stop group tacacs+

aaa accounting commands 1 default start-stop group tacacs+

aaa accounting commands 2 default start-stop group tacacs+

aaa accounting commands 3 default start-stop group tacacs+

aaa accounting commands 4 default start-stop group tacacs+

aaa accounting commands 5 default start-stop group tacacs+

aaa accounting commands 6 default start-stop group tacacs+

aaa accounting commands 7 default start-stop group tacacs+

aaa accounting commands 8 default start-stop group tacacs+

aaa accounting commands 9 default start-stop group tacacs+

aaa accounting commands 10 default start-stop group tacacs+

aaa accounting commands 11 default start-stop group tacacs+

aaa accounting commands 12 default start-stop group tacacs+

aaa accounting commands 13 default start-stop group tacacs+

aaa accounting commands 14 default start-stop group tacacs+

aaa accounting commands 15 default start-stop group tacacs+

aaa accounting network default start-stop group tacacs+

aaa accounting connection default start-stop group tacacs+

aaa accounting system default start-stop group tacacs+

Many thanks in advance,

Dan

  • AAA Identity and NAC
1 REPLY

Re: TACACS Accounting

Hello Dan,

Do you see any issues on :

show accounting

"You can also use the show accounting command to step through all active sessions and to print all the accounting records for actively accounted functions"

Also, try

debug aaa accounting

vlad

343
Views
0
Helpful
1
Replies
This widget could not be displayed.