Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

TACACS config on Cisco Pix & ASA

I am looking for a similar configuration for my Cisco PIX & ASA to configure with Cisco ACS, with the below said commands I could able track what command a user has entered on the switches/router. Any help is highly appreciated for me to configure in PIX & ASA.

aaa new-model

aaa authentication login default group tacacs+ enable local

aaa authentication enable default group tacacs+ enable

aaa authorization exec default group tacacs+ if-authenticated

aaa authorization commands 1 default group tacacs+ if-authenticated

aaa authorization commands 15 default group tacacs+ if-authenticated

aaa accounting exec default start-stop group tacacs+

aaa accounting commands 1 default start-stop group tacacs+

aaa accounting commands 15 default start-stop group tacacs+

5 REPLIES
Bronze

Re: TACACS config on Cisco Pix & ASA

Re: TACACS config on Cisco Pix & ASA

Thanks for the response. But this also does accounting like the command whats ever I enter will be listed in the "Report Activity" in the Cisco ACS?

Re: TACACS config on Cisco Pix & ASA

The commands that you enter will be shown on either Tacacs Administration or Command accounting, it depends on what version of ACS you have. As the lines needed for command accounting you need to enter pretty much this:

aaa accounting command

Note command accounting only works with TACACS.

New Member

Re: TACACS config on Cisco Pix & ASA

aaa-server protocol test

aaa-server host .. key...

and all commands should be same

Re: TACACS config on Cisco Pix & ASA

Let me give a try on Monday :-)

610
Views
0
Helpful
5
Replies
CreatePlease login to create content