Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

telnet to ACS

Am doing a telnet to ACS server from L3 switch on port 2002 but it is not working.Error messages are "remote host not responding" from one host and from another L3 it's "closed by foreign host"


Re: telnet to ACS

port 2002 is for the ACS web based management app... ie http(s) only.

Telnet wont work.

New Member

Re: telnet to ACS

Need inputs on to do telnet to the ACS from a L3 6513 switch?

Am trying to telnet from 6513 from where the traffic passes through a FWSM before hitting the ACS.

Am able to see hitcount on the FWSM too.

Re: telnet to ACS

You can't telnet to an ACS server. ACS will either run on a Windows server which won't support telnet connections by default or on an ACS Appliance which runs a very locked down version of Windows and on the appliance the telnet port is blocked as are most of the ports. The only means of managing ACS itself is via a web browser on port 2002.

CreatePlease login to create content