I am using a Cisco 2901 as a Terminal Server with ASYNC Ports. And running Windows NPS for Radius Authentication. I have two users ADMIN and VENDOR. The ADMIN user has full access to all ASYNC ports but what the VENDOR user to only have access to one or two of the ASYNC ports. I did notice that in NPS each port has a unique NAS Port, in this case the number is 27, and NAS-Port-Type is has ASYNC.
Does anyone know to setup the Cisco Router or the Windows NPS to allow the VENDOR account to have access to only certain ports.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...