Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

two-factor authentication with grid card

Hello,

We are looking for a way to authenticate vpn remote-access users on asa using 2 factors authentication.

The first factor is username / password authenticated against a radius server.

Second factor is a code matching an intersection on the grid card. The user must enter the code matching on the grid card. Is there a way to interface the web ssl portal on ASA with this feature.

Thanks and best regards

SImon

1 REPLY
Bronze

Re: two-factor authentication with grid card

This document demonstrates how to configure the Cisco Adaptive Security Appliance (ASA) to use a Remote Authentication Dial-In User Service (RADIUS) server for authentication of WebVPN users. The RADIUS server in this example is a Cisco Access Control Server (ACS) server, version 4.1 This configuration is performed with the Adaptive Security Device Manager (ASDM) 6.0(2) on an ASA that runs software version 8.0(2).

Refer to the document ASA 8.0: Configure RADIUS Authentication for WebVPN Users

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c18ff.shtml#acs

838
Views
0
Helpful
1
Replies
CreatePlease to create content