Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

upgrade ACS 5.3 to 5.4 fails

Hello,

I try  upgrade ACS 5.3.0.40 to new version 5.4.0.46. Everything looks ok:

ACS-machine/acsadmin# application upgrade ACS_5.4.0.46.tar.gz rep01

Do you want to save the current configuration ? (yes/no) [yes] ?

Generating configuration...

Saved the running configuration to startup successfully

% CARS Install application required post install reboot...

Broadcast message from root (pts/0) (Thu Dec  6 23:36:41 2012):

The system is going down for reboot NOW!

Application upgrade successful

But ACS machine (vmware instance) can't boot with this result: Volume group "smosvg" not found. (for details see attachment)

Any ideas?

--

martin

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: upgrade ACS 5.3 to 5.4 fails

Did you install patch 8 on the 5.3.0.40 before upgrading to 5.4?

Maybe you are running into CSCuc93106..

edit:

ehhmm .. unlikely.

5 REPLIES
New Member

Re: upgrade ACS 5.3 to 5.4 fails

Did you install patch 8 on the 5.3.0.40 before upgrading to 5.4?

Maybe you are running into CSCuc93106..

edit:

ehhmm .. unlikely.

New Member

Re: upgrade ACS 5.3 to 5.4 fails

joopv,

of course I have no patch installed! before upgrade to 5.4 is needed patch 6 or higher (patch 7, 8).

thanks.

--

martin

New Member

Re: upgrade ACS 5.3 to 5.4 fails

Hello joopv,

after successfully installing patch 8, upgrade to 5.4 has the same issue - kernel panic after reboot to 5.4. Any idea?

--

martin

Cisco Employee

upgrade ACS 5.3 to 5.4 fails

Martin,

How much disk space did you allocate for ACS when you initially created the VM?

Javier Henderson

Cisco Systems

New Member

upgrade ACS 5.3 to 5.4 fails

Javier,

it was long time ago, I can't remember. But I think, there was enough space (based on install/upgrade guide).

In the final, I exported configuration from version 8.3, then install fresh 8.4 and import saved configuration. I had two ACS boxes, therefore whole upgrade was without interuption 'radius services'.

martin

3899
Views
0
Helpful
5
Replies