Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Upgrading ACS to 3.2

Greetings,

By upgrading to ACS 3.2, will all my settings and securities remain the same? If not, I have a router tied to the server and I will get locked out. I heard there is a particular order to removing the lines to avoid locking myself out. Is this true?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Upgrading ACS to 3.2

You will need to select the option "Yes, import the existing configuration" while upgrading the ACS software. Information on Upgrading Cisco ACS software while Preserving Existing Configuration can be found in the documentation at

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs32/win32sig.htm#9934

2 REPLIES
Silver

Re: Upgrading ACS to 3.2

You will need to select the option "Yes, import the existing configuration" while upgrading the ACS software. Information on Upgrading Cisco ACS software while Preserving Existing Configuration can be found in the documentation at

http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs32/win32sig.htm#9934

New Member

Re: Upgrading ACS to 3.2

Thanks....

Just a bit paranoid.... didn't want to lock yself out.

105
Views
0
Helpful
2
Replies