This error message is very generic. You may see this for number of reason. Here are few things to check-
-Make sure that you have AD groups mapped to one of the ACS groups. Otherwise, if you have "NO Access" then you will see this messgae.
-Under "Unknown user policy", make sure to have "Check the following external user databases" box checked and list your AD as "Selected Database".
-Under Database Configuration, if you have "Verify that "Grant dialin permission to user" then make sure that this is also checked in the AD users. You may want to uncheck this and see if that helps. My suggestion would be to allow this on the AD when you create users.
The only time i have seen this is was two weeks ago when I tried to upgrade my IOS on my 3060 to 4.0.5. Opened a TAC and after four hours and two esculations through Cisco, they found documentation on this being a bug in 4.0.5. I went back to 4.0.1.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...