Values not saved in "Global Authentication Setup" page
I searched a bit in this forum but I couldn't find a related topic. So here is my problem.
We are trying to deploy a small NAC lab environment. We use NAC Appliance v4.1.
Now the problem is, that I like to set the values for PEAP and EAP-TLS in the "Global Authentication Setup" page. However, every time I press "Submit and restart" all checkboxes for PEAP and EAP-TLS are not checked anymore.
I use a WebServer certificate from our PKI and I created it as described in various guides.
If I create a self-signed certificate with ACS it works fine, but this will not be feasible for a larger deployment.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...