Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VVID

Hi

Is there a way to assign a voice vlan dynamically in an interface via a radius server?

best regards

Sergio

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions

Re: VVID

Sorry. I corrected the link above.

Here is another doc that I hope you'll find useful:

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6638/config_guide_c17-605524.html#wp9000514

Rating useful replies is more useful than saying "Thank you"
5 REPLIES

Re: VVID

Yes. But it depends also on your IOS version.

Check this for more details:

https://supportforums.cisco.com/docs/DOC-22478

Regards,

Amjad

Sent from Cisco Technical Support iPad App

Rating useful replies is more useful than saying "Thank you"
New Member

Re: VVID

Could you please repost the link?

thanks

Re: VVID

Sorry. I corrected the link above.

Here is another doc that I hope you'll find useful:

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6638/config_guide_c17-605524.html#wp9000514

Rating useful replies is more useful than saying "Thank you"

VVID

Sergio,

In addition to what Amjad posted here is a snip from the 3750 configuration guide for 802.1x authentication for the 3750s.

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/15.0_1_se/configuration/guide/sw8021x.html#wp1289244

I would start off by trying to send the device-traffic-class=voice along with the vlan attributes.

thanks

Tarik Admani

Tarik Admani *Please rate helpful posts*
New Member

Re: VVID

there was point that i was missing

In the current release of code, a static voice VLAN must be configured on the port (via the switchport access voice vlan ) command before a new VLAN can be assigned via RADIUS.

it solved my problem thanks.

for future reference my working configuration ...

interface GigabitEthernet0/1

switchport mode access

switchport voice vlan 2

authentication host-mode multi-domain

authentication port-control auto

mab

dot1x pae authenticator

spanning-tree portfast

end

533
Views
5
Helpful
5
Replies