Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Wireless User (WLC) authentication through ACS 5.0 & ACS 5.0 integration with AD 2008

I need help regarding above subject.

One of my customer have ACS 5.0.0.21.
They have Cisco WLC as well. Now they want wireless user authentication through ACS 5.0 & ACS 5.0 integration with AD 2008.
I have tried a lot to get any relevant document related to same issuefrom Internet but unfortunately there is no doc. While searching I haveseen lot of doc related to ACS 4.0 & 4.1 wireless userauthentication but not ACS 5.0.

If anyone have any idea or someone have any experience on it, so kindly let me know as early as possible.

Waiting for postive & prompt response.

Thanks & Regards,

Tabish Mirza

7 REPLIES
Cisco Employee

Re: Wireless User (WLC) authentication through ACS 5.0 & ACS 5.0

Hi Tabish:


Unfortunately, there is no specific document for wireless authentication with ACS 5.x

If you wish you can check the below listed sections from acs 5.1 user guide:

You can configure AD on Windows to use as external database, you can use the following link to integrate your AD

http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/users_id_stores.html#wp1053213

For authorization using TACACS+

http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/pol_elem.html#wp1074366


For configuring managing access

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/access_policies.html


HTH


Regards,

JK


Plz rate helpful posts-

~BR Jatin Katyal **Do rate helpful posts**
New Member

Re: Wireless User (WLC) authentication through ACS 5.0 & ACS 5.0

Hi Tabish,

Did you find out how to do it? I'm facing the same issue. I have WLC authenticate via ACS4.2 to AD, however I'd like to upgrade 4.2 to 5.1.

Please let me know if you found any useful info.

Thanks,

Tao

New Member

Re: Wireless User (WLC) authentication through ACS 5.0 & ACS 5.0

Our Cisco SE sent me this link that has ACS5 demo videos. One of them is wireless. Hope this helps.

http://cisco.com/en/US/products/ps9911/prod_presentation_list.html

New Member

Re: Wireless User (WLC) authentication through ACS 5.0 & ACS 5.0

thanks....thanks a lot for your help & cooperation. Let me have a look on it that whether it is useful for me or not & in the meantime if you get anything else, so please do apprise me.

Thanks Once Again

Tabish Mirza

New Member

Re: Wireless User (WLC) authentication through ACS 5.0 & ACS 5.0

hi tabish,

gud day, did you solved this setup? i have same problem also, same as your setup.

thank you and regards

New Member

Re: Wireless User (WLC) authentication through ACS 5.0 & ACS 5.0

I could be wrong, but I thought that ACS 5.0 and 5.1 didn't work well with

AD '08.  ACS 5.2 is out that should work with AC '08

Cisco Employee

Re: Wireless User (WLC) authentication through ACS 5.0 & ACS 5.0

Hi,

When doing this setup please make sure you are running ACS 5.0.0.21.6 or later due to a major issue with WLCs.

Only patch 6 or later versions work with WLCs.

Regarding AD 2008 support, please note that only ACS 5.2 supports all editions of:

Windows AD 2003

Windows AD 2008

Windows AD 2008 R2.

Please takea a look into this document showing how to integrate with AD and how to create the authentication flows (it shows switches as AAA clients, however the phylosofy is the same for WLCs):

https://supportforums.cisco.com/docs/DOC-13545.

HTH,

Tiago

--

If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

2496
Views
0
Helpful
7
Replies
CreatePlease to create content