wlc with redirect-acl

[jiyoung Kim]

                   Hi, I'm using ISE and I want to redirect https traffics to one web-page.

so I used cisco-av-pair = url-redirect=test123

also, test123 is existed in WLC with

deny https any

deny any https

permit ip any any

however, it does not redirect to the web-page.

after client is accessed to wifi, when I see client on wlc, redirect-url is not applied but aaa-overide acl is applied to test123

anyone know why ?

I'm using ISE 1.2.0.899 with 1,2,3,4,5 patches

and wlc 7.4.115

[Naveen Kumar]

Did u check the firewall to see if it may be blocking port 8443?

please have a look on this discussion:

https://supportforums.cisco.com/thread/2228637

[jiyoung Kim]

alsolutely not blocking any port. I ONLY HAVE REDIRECT-ACL from AUTHZ profile

but when it goes to wlc, it becane aaa-overide acl.

[Saurav Lodh]

Please refer below:

http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html