All my APICs are having a docker0 interface with the same IP address 172.17.0.1/16. This subnet is in the production network VLAN 100 and causes the problem with VLAN 100 to access APIC because route was wrong.
Question: How do I change APICs docker0 ip address? I prefer to change them to a loop-back address like 127.0.0.2
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...