Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

11503 and port monitoring

Does anyone know if you can do port monitoring (I want to use a sniffer on a particular port) on an 11503? If so, anyone know the command? Thanks.

4 REPLIES

Re: 11503 and port monitoring

If you are 7.2 and higher code then your answer is below

http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a008015834c.html#wp1099686

Hope it helps

Syed Iftekhar Ahmed

Cisco Employee

Re: 11503 and port monitoring

New Member

Re: 11503 and port monitoring

Can you monitor more than one port to one destination port? Like ports 1, 2 and 3 to port number 4?

Re: 11503 and port monitoring

A SPAN session is the association of a destination port with a source port on the same CSS module. The port that is monitored is called the source SPAN (SSPAN) port.

SPAN can monitor the ingress path, the egress path, or both. You can configure only one SSPAN port in a CSS chassis.

131
Views
12
Helpful
4
Replies
CreatePlease to create content