Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

11506 ethernet management port config

How do I config a static or default route for the ethernet management port so I can get to the ethernet management port from remote subnets.

Is there a workaround?

thanks

2 REPLIES
New Member

Re: 11506 ethernet management port config

You cannot. We're stuck with the same problem. Our workaround was to configure a firewall to spoof every services required with an IP addresse local to the CSS's ethernet management port. Basically, the CSS thinks all of its management services (i.e.: tacacs, ntp, syslog, tftp, etc) are on the same local device (the firewall translates the spoofed IP to the corresponding server's real IP, based on the destination port).

PS: I believe Cisco will resolve this issue in future releases of WebNS.

New Member

Re: 11506 ethernet management port config

Thanks for the quick reply

I'll be waiting for the fix

254
Views
5
Helpful
2
Replies
CreatePlease login to create content