Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

4710 Error in syncup

I have my last 2 contexts showing as Failed in the Device Manager.  When I go to sync them up, i get this:

"Error in syncup VC:  Error in committing transaction."

Any ideas?  It seemed to happen on my last 2 contexts I added only.  I am running A3(2.5).

Thanks,

Jason

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: 4710 Error in syncup

Hi Jason,

This could be (and likely is) a very complex problem that would require developement engagement.  I would recommend reviewing the following bug, which is similar, and see if the work-around listed of doing your CLI Sync for All contexts helps.  Otherwise, I think you would need to go through Cisco TAC for a deep dive of the issue.

CSCtd49660 - Error in VC syncup,Error in Virtual transactions in DM

The above bug is not yet fixed in an availabe release.  It is expected to be in the A3(2.6) release, although I'm not sure it would resolve your issue.

Hope this helps,

Sean

3 REPLIES
Silver

Re: 4710 Error in syncup

Hi Jason,

This could be (and likely is) a very complex problem that would require developement engagement.  I would recommend reviewing the following bug, which is similar, and see if the work-around listed of doing your CLI Sync for All contexts helps.  Otherwise, I think you would need to go through Cisco TAC for a deep dive of the issue.

CSCtd49660 - Error in VC syncup,Error in Virtual transactions in DM

The above bug is not yet fixed in an availabe release.  It is expected to be in the A3(2.6) release, although I'm not sure it would resolve your issue.

Hope this helps,

Sean

New Member

Re: 4710 Error in syncup

Thanks Sean!!!! It seems to have worked.  I know, it will probably go out of sync again, but at least I know for now how remedy until the new version comes out.

Silver

Re: 4710 Error in syncup

Excellent news!!!  Thanks for following up.

Sean

516
Views
0
Helpful
3
Replies
CreatePlease to create content