cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
438
Views
0
Helpful
2
Replies

a problem with time-zone in WAAS

ROMAN TOMASEK
Level 1
Level 1

the customer configured time zone CET on all WAEs. In the CLI, the output from show clock is right. The show ntp status - is OK too. But when I used web GUI - time on some graphs is incorrect;-( Only when I used UTC time-zone for some graph outputs - time is correct (UTC time). When I used CM time or WAE local time - this time is incorrect. Can you help me? Thank you.

1 Accepted Solution

Accepted Solutions

dstolt
Cisco Employee
Cisco Employee

Roman,

Are you using a version newer then 4.0.15? If so, you might be encountering CSCsk16004. From the release notes for 4.0.15 - http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v4015_v4017/release/notes/ws4015_4017rn.html#wp346391

Dan

View solution in original post

2 Replies 2

dstolt
Cisco Employee
Cisco Employee

Roman,

Are you using a version newer then 4.0.15? If so, you might be encountering CSCsk16004. From the release notes for 4.0.15 - http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v4015_v4017/release/notes/ws4015_4017rn.html#wp346391

Dan

thank you very much.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: