Re: ACE-20 Module: automated backup of configuration
If you upgrade to the latest ACE software, which is A2(3.0), you can take advantage of the new backup and restore feature. With this, the ACE will backup all of the following and add it to a .tgz file:
You could use an Expect script to periodically log into the ACE, create the backup, and copy it off the ACE. The backup and restore feature is documented here:
Another option for you would be to use the Application Networking Manager (ANM). It is a graphical user interface for ACE configuration, management, and monitoring. It also allows you to perform backups (and restores).
ANM - Performing Device Backup and Restore Functions
I see this post is a year old - We don't have ANM (yet) and I never heard of an "Expect Script". I don't see kron as an option (as is in all other IOS devices)........any idea whether there are any plans (since this last post) of adding kron capabilities or something other than the two solutions posted here?
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...