I am having an issue with configuration of the GUI for the 4710. If I am using local authentication, the GUI works fine. However when I turn on aaa and use radius to authenticate, I am unable to log into the GUI.
When I place the 4710 into debug for aaa, I am sucessfully authenticating. My radius server's logs state the same.
Are you able to login to the CLI using AAA? Have you configued the role and domain for the user on your AAA server? Here is some documenation on configuring the role and domain for a use on the AAA server:
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...