Managed to set up the connection between the ACE and an SNMP monitoring system. Tested it and found that it was working fine for SNMP performance parameters and traps like linkup/linkdown.
Problem now is that we would like to monitor the failover state /receive notification during failover state change for the ACE. I've uploaded the relevant MIB files (CISCO-L4L7MODULE-REDUNDANCY-MIB.my) to the monitoring system but they are not receiving any SNMP traps / notifications of failover state changes.
Any other configurations that need to be done on the ACE ? snmp-server traps enable command doesn't list anything for failover state change.
Also , is it possible to verify if the "clrRedundancyStateChange" command is being sent out.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
With Vignesh R. P.Welcome to the Cisco Support Community Ask the Expert
conversation.This is an opportunity to learn and ask questions of Cisco
expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and
support for the Cisco NX-OS Software platf...