We are being asked to create HTTPS probes but as expected we will get a HTTP 403 forbidden error as we are not passing the expected certificate for authentication between the server and the ACE. The premise being that the ACE passes throug SSL between external clients to the server.
The requirement is to have the probes monitor the web service and the request-method header is set etc in the https probe.
Can an ACE https probe be configured to use an SSL certificate and if so can anyone advise configuration parameters? Or is an SSL parameter only bound to a L4 policy and probes cannot use SSL certs?
I had exactly the same question. It turns out that SSL probes cannot use certificates ! What I did is a HTTP probe instead. In my case, the web server is aslo able to respond for unencrypted request, in HTTP.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...