Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACE 4710 Issue

Dears,

I have Cisco 4710 configured, but my issue that I can't ping the Virtual IP.

Attached the configuration of the ACE4710.

Appreciate you support,

Regards.

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

ACE 4710 Issue

Hi Ali,

I'd check on the status of the rserver/serverfarm since you configured a TCP probe under the serverfam but no port was specified either on the rserver/serverfarm or the the probe itself. Likely the status of the serverfarm is not operational.

HTH

__ __

Pablo

7 REPLIES
New Member

ACE 4710 Issue

is the issue only with icmp to VIP or applications on VIP are also not accessible?

New Member

ACE 4710 Issue

For now the issue is I can't ping the virtual IP from the client side.

ACE 4710 Issue

Ali,

What´s the VIP in question? Can you paste it in here?

New Member

ACE 4710 Issue

do u have any firewalll in between client network and VIP blocking the ping?  Also i dont see source nat configured for client request accessing servers.

New Member

ACE 4710 Issue

have u created resource class for stick connections in admin context?

resource-class sticky

  limit-resource all minimum 0.00 maximum unlimited

  limit-resource sticky minimum 10.00 maximum unlimited

This is mandatory if u r using sticky based serverfarm in user contexts

Bronze

ACE 4710 Issue

Hi Ali,

I'd check on the status of the rserver/serverfarm since you configured a TCP probe under the serverfam but no port was specified either on the rserver/serverfarm or the the probe itself. Likely the status of the serverfarm is not operational.

HTH

__ __

Pablo

New Member

ACE 4710 Issue

I added the port it is working now.

Thank you

415
Views
0
Helpful
7
Replies