ACE 4710 Issue

[Ali Bahnam]

Dears,

I have Cisco 4710 configured, but my issue that I can't ping the Virtual IP.

Attached the configuration of the ACE4710.

Appreciate you support,

Regards.

[nishchay nadkarni]

is the issue only with icmp to VIP or applications on VIP are also not accessible?

[Ali Bahnam]

For now the issue is I can't ping the virtual IP from the client side.

[Jorge Bejarano]

Ali,

What´s the VIP in question? Can you paste it in here?

[nishchay nadkarni]

do u have any firewalll in between client network and VIP blocking the ping?  Also i dont see source nat configured for client request accessing servers.

[nishchay nadkarni]

have u created resource class for stick connections in admin context?

resource-class sticky

  limit-resource all minimum 0.00 maximum unlimited

  limit-resource sticky minimum 10.00 maximum unlimited

This is mandatory if u r using sticky based serverfarm in user contexts

[pablo.nxh · Accepted solution]

Hi Ali,

I'd check on the status of the rserver/serverfarm since you configured a TCP probe under the serverfam but no port was specified either on the rserver/serverfarm or the the probe itself. Likely the status of the serverfarm is not operational.

HTH

__ __

Pablo

[Ali Bahnam]

I added the port it is working now.

Thank you