cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
829
Views
5
Helpful
5
Replies

ACE 4710 - Monitoring Real Server Showing N/A

s.aluko
Level 1
Level 1

I recently installed a Cisco ACE 4710 version A4(2.0) into our test network. Load balancing across a number of web servers appears to be working ok and serving pages to users. However, when i tried to check the real time stats via device manager (Monitor> virtual contexts> context > Real servers) a number of fields specifically "current connections", "total conns", "failed conns" etc were showing N/A. Do I need to enable this somehow i.e. polling, if so how?

5 Replies 5

Cesar Roque
Level 4
Level 4

Hello Samson,

Try to reload the ACE GUI with the command

ACE-/Admin# dm reload

Are you sure you want to reload ? [y/n]:

y

Beginning Reload...

--------------------- Cesar R ANS Team

Thanks for the response Cesar. I have tried reloading the dm as you mentioned but it did not fix the issue.

Hello Samson,

You may try to reboot the entire ACE 4710, probably during a maintenance window, some java process might have gotten stuck.

If the issue persists then open a TAC case since there are some software defects related to this behavior.

Jorge

Thanks for the response Jorge. This now fixed. I had to enable snmp. Regards.

Thanks Samson Aluko. That helped me a lot.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: