ACE 4710 no failover on ft track

[dlance]

I have a pair of ACE appliance setup to failover on the FT TRACK of a vlan. I tried disconnecting the primary ACE from network and failover did not occur and the backup did not takeover. Also indicated in the FT group summary.Attachemnts are FT configs

[dlance]

Ok, that is done. I am waiting for a testing window again. But I can ping from the secondary and the interfaces show as up with a ft status of standby.

Will advise

[dlance]

Can you please look at my configs again to make sure all my priorities and the ft track is correct. I saw a reference in another suggestion that had incorrect priority values that would not allow failover.