I have configured load balancing for a small server farm of 2 oracle ERP servers ( servers accepting web requests on port 8000)
Design is routed mode where I have a client vlan and a server vlan , real servers default gateway is set to the alias ip address of the ace server leg ( actually we have 2 ace appliances with redundancy setup)
When we access the application from client vlan everything works fine but when we do the same from server vlan
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...