I am sure that this is a basic question and someone can help me out. How do you configure the ACE to allow non-LB traffic/requests (eg back-up's, mgt) to access the real servers directly (ie not through the VIP).
The environment I have is traditional routed mode, with client-side and server-side VLAN's. I can configure the ip addressing of the server-side VLAN to be reachable from all parts of the network. All traffic will be ingressing the ACE on the client-side VLAN (including client requests that need load-balancing, and traffic not to be load-balanced (backups etc)).
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...