Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ACE 4710 rserver in multiple server farms

Hi

THis may be a silly question but can I put multiple rservers in multiple server farms?

So for example rserver1 and rserver2 are put in serverfarm production1 and are in use with particular sticky and load balancing settings.

Can I then create serverfarm test_production and put both rserver1 and rserver2 in it?  Then play around with the sticky and load balancing settings as a test without affecting the production serverfarm.  

Thanks, St.                

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

ACE 4710 rserver in multiple server farms

You can put rservers in multiple serverfarms at the same time.  Using policy and class maps you determine which traffic will get sent to each serverfarm.

You can then use a Layer 7 class map to direct any traffic from www.domain.com to production serverfarm and another class map to direct traffic from test.domain.com to a different serverfarm.  Any load balancing changes only will affect the classmap.

Obviously your servers will would have to multiple virtual hosts to serve out traffic for both domains.

1 REPLY
New Member

ACE 4710 rserver in multiple server farms

You can put rservers in multiple serverfarms at the same time.  Using policy and class maps you determine which traffic will get sent to each serverfarm.

You can then use a Layer 7 class map to direct any traffic from www.domain.com to production serverfarm and another class map to direct traffic from test.domain.com to a different serverfarm.  Any load balancing changes only will affect the classmap.

Obviously your servers will would have to multiple virtual hosts to serve out traffic for both domains.

421
Views
0
Helpful
1
Replies
CreatePlease to create content