Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACE 4710 SSL server LB with stickiness

I will be replacing 11500 CSS which are not doing SSL termination, just load-balancing SSL sessions terminated on servers with ACE 4710.

On their CSS config, they were doing SSL-sticky. I understand the 4710 doesn't support SSL sticky, but can perform the same function by parsing the HTTP header. Has anyone done this config before and know where/how to parse the header to look for the SSL session# and stick connections to same server?

THANKS!

3 REPLIES

Re: ACE 4710 SSL server LB with stickiness

In Ace 2.x code GPP (Generic protocol parsing) was introduced that enables ACE to look into the Layer 4 payload.Which is how this stickiness id achieved.

details at

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A2/configuration/slb/guide/sticky.html#wp1133923

I dont think its currently available on ACE appliance yet.

Syed

New Member

Re: ACE 4710 SSL server LB with stickiness

Syed,

Unfortunately, V2.X is not available yet on the appliance.

Re: ACE 4710 SSL server LB with stickiness

Thats what I mentioned in my post.

I dont think Ace appliance currently support this.

Syed

273
Views
0
Helpful
3
Replies